FLC-S1 Open-Bed Fiber Laser Cutting MachineWater-cooled continuous-wave cleaning
KFC-WC-A Water-Cooled Continuous-Wave Laser Cleaning Machine
Review continuous-wave cleaning for your substrate, contamination and accepted surface finish.
Product photograph. Product view 1. Equipment shown may include options; confirm the selected version and equipment list in your quotation.
Product photograph. Product view 2. Equipment shown may include options; confirm the selected version and equipment list in your quotation.
Product photograph. Product view 4. Equipment shown may include options; confirm the selected version and equipment list in your quotation.
Exterior reference model based on the product images. Proportions are approximate; unconfirmed hidden details are simplified. Final equipment follows the agreed configuration.
View product imagesSpecify the surface and the operating conditions.
Review continuous-wave cleaning for your substrate, contamination and accepted surface finish.
Review the machine and the workflow.
Continuous-wave process
Identify the substrate and contamination before reviewing source, head and scan settings.
Water-cooled unit
The gallery shows the supplied grey-and-white cabinet version. Confirm cooling, electrical requirements and duty cycle together.
Surface acceptance
Provide a sample and define allowable changes to the underlying material rather than relying on appearance alone.
Plan your KFC-WC-A configuration.
Use the following product identity and planning requirements when requesting a configuration.
| Operation | Information to share | Configuration to review |
|---|---|---|
| Surface | Substrate, coating or contamination and photographs | Laser source, head and scan settings |
| Acceptance | Required finish and allowable surface change | Sample test and inspection criteria |
| Site | Reach, work area, extraction and electrical supply | Fiber routing, cooling and operating setup |
Technical data & source options
| Model / series | KFC-WC-A |
|---|---|
| Equipment format | Water-cooled continuous-wave cleaning |
| Configuration basis | Selected version and itemised quotation |
| Laser power options | 1500 W, 2000 W or 3000 W |
| Laser type | Continuous-wave fiber laser |
| Cooling method | Water cooling |
| Power adjustment | 10–100% |
| Standard delivery fiber length | 10 m |
| 3000 W configuration wavelength | 1080 ±10 nm |
| 3000 W configuration fiber options | 10 m standard; 15 m or 20 m optional |
| 3000 W configuration scan system | Dual-axis galvo scanning |
| 3000 W configuration cleaning width | 0–300 mm; up to 500 mm with optional wide lens |
| 3000 W configuration cooling | Industrial water chiller |
| 3000 W configuration electrical supply | AC 380 V ±10%, three-phase, 50/60 Hz |
| 3000 W configuration 220 V option | Optional step-up transformer; confirm the complete electrical package |
| 3000 W configuration machine power consumption | Approximately 12–15 kW at full load, including chiller |
| 3000 W configuration machine dimensions | Approximately 1540 × 680 × 1090 mm |
| 3000 W configuration machine weight | Approximately 220 kg |
| Operating environment | 5–40 °C; relative humidity ≤80%, non-condensing |
Power, dimensions, capacity and performance must match the selected equipment version and the agreed quotation.
Equipment version and included items
Confirm the selected machine version, source, head, controls and supporting equipment in an itemised quotation.
Installation and acceptance
Agree the delivery layout, utilities, installation responsibilities, sample requirements and inspection criteria before scheduling the machine.
Before you choose.
Is this the same process as pulsed cleaning?
No. KFC-WC-A is the continuous-wave series. Review the heat input and accepted substrate condition for your application; pulsed alternatives have separate product pages.
What should I send for a KFC-WC-A quotation?
Substrate, coating or contamination and photographs. Also include your production requirements, destination and installation conditions.
Are all accessories shown included?
Images identify the supplied reference version. Confirm the machine, process head, supporting equipment and accessories in the itemised quotation.
Can I confirm the result with a sample?
Share a representative part or material and define measurable acceptance criteria. Review the proposed configuration and test plan before arranging the sample.
Discuss your KFC-WC-A project.
Review continuous-wave cleaning for your substrate, contamination and accepted surface finish. Send your requirements so we can review the configuration and equipment scope.
- Materials and part details
- Processes and quality requirements
- Installation and supporting equipment